Per Kilogram:1kg/bottle,5kg/plastic drum,20kg/plastic drum,25kg/iron drum,27kg/iron drum,200kg/iron drum Per Carton: 1kg bottle,12kg/carton,5kg drum, 20kg/carton Per Pallet:20kg/carton,27carton/pallet;25kg/drum,18barrel or 24 barrel/pallet;200kg/drum,4 barrel/pallet 20 feet container:12.5T with pallet,about 20T without pallet 40 feet container:28T with pallet Vacuum bag can take according to users demand.
1 - 200
201 - 1000
1001 - 10000
To be negotiated
Transparent potting silicone rubber
Rognxingda Silicone potting compound is two-component potting material consisting of Part A(base) and Part B(catalyst),which is a thick and stick liquid before uncured.It can be used to stick,seal and potting electronic components after curing.It is an ideal material to seal electronic parts for the effect of waterproof,dust-proof,insulation,heat conduction,flame retardant,privacy,anti-corrosion,temperature resistance and shockproof.
1.Follow EU ROHS
2.No corrosive effect
3.High waterproof level
4.Excellent adhesion strength
5.Low viscosity,good fluidity
6.Flexibility allows for easy removal
7.Significant extending the life of electronic parts
8.Good temperature and moisture endurance
9.Outstanding isolation and chemical resistance
10.Moderate thermal conductivity
11.Room temperature or heat accelerate cure
1.Working at least room-sized ventilation is recommended.
2.Wearing rubber gloves will help minimize skin contact.
3.If skin contact occurs,wash off immediately with soap and water.
4.Wear glasses to avoid contacting with eyes.
5.If eyes contact occurs,flush eyes with water and seek immediate medical attention.
6.Keep out of reach children.
Break Down Voltage(KV/mm)
Specific Inductive Capacity(50HZ)
Dielectric Loss Factor(20HZ)
1.The working time of RTV2 silicone rubber indicates how long the material will remain fluid at 23℃~25℃,However,work should be carried out in the shortest time ,because viscosity increases with me.
2.The curing time of tin cured potting silicone rubber is related to the temperature and the thickness of the product,but platinum cured potting silicone rubber only affected by temperature.
Step 1:Weigh Part A and Part B by the accurate ratio
Step 2:Mix Part A with Part B and stir thoroughly
Step 3:Pour the mixture into the electronic components
Step 4:Cure in no-dust condition at room temperature(the warmer temperature,the faster curing)
Applicable to small or thin-layer electronic components, modules, photoelectric display and circuit board encapsulation protection (encapsulation thickness is generally less than 4 mm, generally 2-3 mm)
Dilivery and package
What kind of liquid silicone products you are making?
--Tin cured silicone rubber, Platinum cured silicone rubber, Transparent silicone rubber, Silicone foam, Urethane rubber, Polyurethane resin, Potting silicone rubber; We can adjust all the data according to the customers requirements
Do you offer free sample to client?
--Yes, we can provide the sample for test. Try our sample , I think you will satisfied with our products
How about the quality control in your factory?
--We have professional QC team to control the quality during production. Goods will be 100% inspected before shipment.
How to make the silicone mould to use longer time?
--The best way is:
1)Please choose the right liquid silicone according to your applications.
2)Don’t use too much oil in mold making, because it can make the silicone mould become soft.
3)Silicone mould can be used for a long time , it’s better to wait 2 hours after the mould completely cured.
Why bubbles occurred after mixing the part A and part B ?
--This is normal physical phenomenon. Because the silicone rubber is a liquid with viscous,it will produce some bubbles when mixing, so you'd better to use vacuum machine to remove the bubbles before pouring.